1Device Parameter Setting
(Please select the device that you want to set. Then press "Settings" icon, then you can do related parameter setting.) If you need to learn more detectors and remotes, then press "Accessories" icon, then press "+Add"
2Enter adding remote control status
Press【CDDE】key on the panel 1 second, alarm panel will "beep" one time, "Status" Signal lights turn on and alarm host voice prompt "Add remote control". This means the alarm host under adding remote control status.
3Add remote control
While under adding remote control status, press any key of the remote control to send out a signal, the alarm host will voice prompt "successful". If voice prompts "beep" one time, it means this remote control has been added, please change another remote control to add. Press【CDDE】and hold on, the alarm host "beep, beep" two times, then exit adding remote control status. The alarm host can add maximum 50pcs remote controls.
4Delete remote control
Press【CDDE】key three seconds under adding remote control status, the alarm host will "beep, beep" two times. Then means the remote control is deleted successfully.
5Add detectors
While under adding remote control status, press【CDDE】key one second, the alarm host voice prompt "add one zone", it means the host is under "add detectors status in zone 1". Trigger the detector to send out a signal, voiceprompts "add successful", then means the detector is added successfully. If voice prompts "beep", it means this detector has been added, please change another detector to add.
Press【CDDE 】key one second again, alarm host voice prompts "add two zone" , repeat above step.